重切削傳統車床-TK2500N

重切削傳統車床

TK2500N

加入詢價車

Capacity
Swing over Bed	2500 mm (98.42＂)
Swing over cross slide(Half length)	2200 mm (86.61＂)
Swing over cross slide(Full length)	2050 mm (80.7＂)
Center height	1250 mm (49.21＂)
Bed width / Auxiliary guide	1345 mm (52.95”) / 1550 mm (61.02”)
Between centers	3000 – 12000 mm (120 – 480“)
Between width / Auxiliary guide	1345 mm (52.95”) / 1550 mm (61.02”)
Tailstock
Center taper	MT7
Quill diameter	Dia. 290 mm (11.4”) Heavy duty rotating qui
Quill travel	300 mm (11.81”)
Headstock
Spindle bore, Dia.	Dia. 203 mm (8”)
Spindle nose	A2-15
Spindle speed (rpm), steps	6 – 400 rpm
Spindle motor	75 HP
Miscellaneous
Coolant pump	1 HP
Rapid motor	2 HP
Lubricatio pump	12 W
Machine weight (3 meter B.C.)	31000 kgs
Each extra 1000 mm weight	3500 kgs
Feed and Threads
Cross feeds	0.056 – 0.96 mm / rev (45 kinds
Cross slide travel	1250 mm (full length) / 510 mm (half length)
Longitudinal feeds	0.13 – 1.92 mm / rev (48 kinds)
Lead screw	Dia. 60 mm x 2 TPI (inch) or Dia. 60 mm x 12 mm (metric)
Threading range, inch	1 – 15 TPI (48 kinds)
Threading range, metric	2 – 30 mm / pitch (48 kinds)
Module pitch threads	1 – 15 M (32 kinds)
DP. pitch threads	2 – 30 HP (45 kinds)
Compound rest travel	X1: 250 mm manual feeding / Z1: 350 mm auto feeding
Tool size	50 x 50 mm (2 x 2”)

※ 規格如有變更，恕不另行通知。