龙门铣床-DCM-2842

龙门铣床

DCM-2842

加入询价车

Table
T-Slot (W x D x M)	28 mm x 180 mm x 13 (1.1＂ x 7＂ x 13)
Length	4000 mm (157.4＂)
Width	2200 mm (86.6＂)
Maximum load	20000 kgs
Travel
Longitudinal travel(X axis)	4200 mm (165.3＂)
Cross travel (Y axis)	2800 mm (110.2＂)
Vertical travel (Z axis)	1100 mm (43.3＂) / 1400 mm (55.1＂) (opt)
Distance from spindle end to table	180 ~ 1280 mm (7＂ ~ 50.4＂)
Distance from spindle center to column	430 mm (16.9＂)
Distance between columns	2850 mm (112.2＂)
Spindle
Spindle taper	BT50
Spindle drive motor(Con./ 30min)	22 kw / 26 kw (opt 30 kw / 37 kw)
Spindle speeds	6000 rpm
ATC
Tool size	Dia. 125 mm (4.9＂)
Max. tool size	Dia. 220 mm (8.6＂)
Tool storage capacity	32 tools
Max. tool length	400 mm (15.7＂)
Max. tool weight	20 kgs
Tool shank & pull stud	BT 50 45˚
Feed
Cutting federate	12000 mm/min
Rapid traverse (X/Y/Z)	12 / 15 / 15
Miscellaneous
Power requirement	50 ~ 60 KVA
Pneumatic requirement	6.5 kgs/cm²
Machine size length	11400 mm(449”)
Machine size width	6000 mm (236”)
Machine size height	5200 mm (216.5”) / 6100 mm (240.1”)
Machine weight	49 ton

※ 规格如有变更，恕不另行通知。

特性

能够进行重切削和高速加工
适合超重型零件的精密加工
铸件采用优质米汉纳铸造技术和球墨铸铁制成
X、Y、Z轴滚柱式线性导轨
直驱式高速主轴结合高/低两段式齿轮箱
主轴头配置蓄能器式自动补偿平衡系统