重切削车床(平床式)-LAN 36

重切削车床(平床式)

LAN 36

重加工系列

加入询价车

Capacity
Swing over Bed	916 mm (36.1＂)
Swing over cross slide	570 mm (22.4＂)
Center height	470 mm (18.5＂)
Distance between centers	1200mm (47.2”), 2200mm (86.6”), 3200mm (125.9”), 4200mm (165.3”), 5200mm (204.7”),6200mm (244”)
Bed width	510 mm (20＂)
Spindle
Spindle speed / A2-11(4")	30~1200 rpm
Spindle speeds / A2-11(6")	30~860 rpm
Spindle speeds / A2-15(9")	12~700 rpm
Spindle center	MT5 (OPT. MT6)
Carriage
Turret	H4 or V8 Hydraulic
Tool size	H4 or V8 32x32
X axis Travel	430 mm (16.9＂)
Z axis Travel	1200mm (47”), 2200mm (86”), 3200mm (125”), 4200mm (165”), 5200mm (204”)
X axis rapid travel, Ball screw dia.	6M / min dia. 40 x P5
Z axis rapid travel, Ball screw dia.	6M / min 1.2M~3M dia. 50 x P10, 4M~5M dia. 63 x P10
Tailstock
Quill diameter	Static quill with dia. 160 mm (6.2＂), OPT. Rotating quill
Quill travel	230 mm (9＂)
Quill taper	MT6
Motor
X axis servo motor	FANUC αiF8 1.6 kw
Z axis servo motor	1.2M~3M FANUC αiF12 3.0 kw, 4M~5M FANUC αiF22 4.0 kw
Spindle motor	FANUC αiI15 15/18.5 kw, OPT 18.5/22 kw, 22/26 kw
Coolant pump	0.845 kw
Hydraulic pump	2 kw
Machine weight
1500 / 1200 mm center distance	7900 kgs
Each extra 500mm weight	1000 kgs

※ 规格如有变更，恕不另行通知。

特性

强力箱型主轴箱
可程序自动换文件
主轴转速可程序