Flat Bed CNC Lathe-TNC890A
Flat Bed CNC Lathe
TNC890A
Swing: 900mm
BC: 1500 - 5000 mm
- Easy to use MPG / semi auto / Full CNC operation with auto feeding
- 3 positions bearing supported headstock, ground and hardened gear.
- Meehanite FC-30 casting
MENU
| Capacity | |
|---|---|
| Swing over Bed | 900 mm (35.4”) |
| Swing over cross slide | 600 mm (23.6”) |
| Center height | 450 mm (17.7”) |
| Distance between centers | 1500 - 5000 mm (60”) - (196”) |
| Bed width | 480 mm (18.9”) |
| Width of cross slide | 280 mm (11”) |
| Spindle | |
| Spindle speed / A2-11(4") | 12~1200 rpm |
| Spindle speeds / A2-11(6") | 25~860 rpm |
| Spindle speeds / A2-15(8") | 15~600 rpm |
| Carriage | |
| Turret | H4 or V8 |
| Tool size | H4: 32x32 mm, V8: 25x25 mm |
| X axis Travel | 400 mm (15.7”) |
| Z axis Travel | 1305 mm (51.4”),4800 mm (188.98”) |
| X axis rapid travel, Ball screw dia. | 6M/min (Dia. 32mm) |
| Z axis rapid travel, Ball screw dia. | 6M/min (Dia. 50mm) |
| Tailstock | |
| Quill diameter | 105 mm (4.1”) |
| Quill travel | 150 mm (6”) |
| Quill taper | MT6 |
| Motor | |
| X axis servo motor | 1.6 Kw |
| Z axis servo motor | 3 Kw |
| Spindle motor | 15 / 18.5 Kw |
| Lubricant pump motor | 0.455 Kw |
| Coolant pump | 1 Kw |
| Machine weight | |
| 1500 mm center distance | 5000 kgs |
| 2000 mm center distance | 5500 kgs |
| 3000 mm center distance | 6500 kgs |
| 4000 mm center distance | 7500 kgs |
| 5000 mm center distance | 8/500 kgs |
※ The specifications are subject to change without prior notice.
Features
1. Easy to use:
Teach In with Fagor 8055i; MPG / semi auto / full CNC modes for quick setup and repeat production.
2. Rigid bed:
Meehanite FC 30 one piece casting, 480 mm bed width, hardened ground ways with auto lubrication and precision ballscrews.
3. High torque spindle:
4 step geared speeds, 3 point support spindle, oil bath lube and hardened ground gears for stable low rpm cutting.
4. Expandable:
Options for Cs/C axis, VDI driven turret + Y axis, milling/drilling/grinding, steady/follow rests, rear chuck, chip conveyor, full splash guard, CE/transformer/auto load unload system.
5. Wide capacities:
DBC 1,500–5,000 mm; spindle bore Ø104 mm (opt. Ø155/230 mm).
Teach In with Fagor 8055i; MPG / semi auto / full CNC modes for quick setup and repeat production.
2. Rigid bed:
Meehanite FC 30 one piece casting, 480 mm bed width, hardened ground ways with auto lubrication and precision ballscrews.
3. High torque spindle:
4 step geared speeds, 3 point support spindle, oil bath lube and hardened ground gears for stable low rpm cutting.
4. Expandable:
Options for Cs/C axis, VDI driven turret + Y axis, milling/drilling/grinding, steady/follow rests, rear chuck, chip conveyor, full splash guard, CE/transformer/auto load unload system.
5. Wide capacities:
DBC 1,500–5,000 mm; spindle bore Ø104 mm (opt. Ø155/230 mm).
This site uses cookies to improve your browsing experience. we'll assume you're OK to continue. If you want to read more about this, please chick PRIVACY thank you.
Confirm