- HeadstockExtra heavy duty casting headstock with:
-Two opposed high precision SKF taper roller bearings
-Precision grounded and hardened gears
-Auto lubrication system - Carriage and ApronProportional and massive size carriage and apron
Easy operation
Spring loaded longitudinal hand wheel handle
Adjustable clutch for carriage
Chrome-nickel satin finished dials
Direct reading cross feed dial
Left side thread chasing dial
Two feed shaft and lead screw supports for machine above 3 meters. - Dual Gear BoxQuick change dual gear box provides both Inch and Metric threads
Fully automatic lubricated and total enclosed gear box - Bed and PedestalExtra heavily ribbed, massive designed, single piece casting bed
Stable 400 / 460mm (Opt.) width bed
Induction hardened and precision ground bed and cross slide ways
- Copy device with 120mm stroke length
- Semi-automatic rapid threading attachment
- Heavy duty cast iron tailstock body MT6 taper quill movement by 2 speed reduction box and handwheel
- Heavy duty taper attachment
| Description | TK960 | TK1060 | TK1200 |
| Capacity | |||
| Swing over bed | 960 mm (37.7") | 1060 mm (41.7") | 1170 mm (46") |
| Swing over cross slide | 650 mm (25.5") | 750 mm (29.5") | 860 mm (33.8") |
| Swing over gap | 1510 mm (59.4") | 1610 mm (63.3") | 1720 mm (67.7") |
| Center height | 480 mm (18.8") | 530 mm (20.8") | 585 mm (23") |
| Width of gap | 570 mm (22.4") | ||
| Between width / Auxiliary guide | 560 mm (22”) / 660 mm (25.9") | ||
| Between centers | 2M, 3M, 4M, 5M, 6M, 7M, 8M, 9M | ||
| Headstock | |||
| Spindle bore, Dia. | Dia. 156 mm (6") / Opt. 230 mm (9") | Dia. 156 mm (6") / Opt. 230 mm (9"), 310 mm (12"), 360 mm (14") | |
| Spindle nose | A2-11 / Opt. A2-15 | A2-11 / Opt. A2-15, A2-20 | |
| Spindle speed (rpm), 12 steps | 9-600 / Opt. 6-400 | 9-600 / Opt. 6-400, 5-300 | |
| Main spindle motor | 25HP / Opt. 30HP | ||
| Feed and Threads | |||
| Cross travel | 540 mm (21.2") | ||
| Cross feeds | 0.065-0.96 mm / rev (48 kinds) | ||
| Longitudinal feeds | 0.13-1.92 mm / rev (48 kinds) | ||
| Lead screw diameter | Dia. 50 mm (1.9") x 2 TPI | ||
| Threading range, metric | 20-30 mm / pitch (44 kinds) | ||
| Threading range, inch | 1-15 TPI (48 kinds) | ||
| Module pitch threads | 1-15M (32 kinds) | ||
| DP. pitch threads | 2-30P (48 kinds) | ||
| Compound rest travel | 300 mm (11.8") | ||
| Tool size | 40 x 40 mm (1.5 x 1.5") | ||
| Rapid motor | 1/2 HP | ||
| Tailstock | |||
| Quill Diameter | Dia. 140 mm (5.5") / Dia. 200 mm (7.87") | ||
| Center taper | MT6 | ||
| Quill travel | 300 mm (11.8") | ||
| Miscellaneous | |||
| Coolant pump | 1/4 HP | ||
| Net weight, kgs | 8000 (2M), 8550 (3M), 9100 (4M), 9900 (5M), 10700 (6M), 11600 (7M), 12500 (8M), 13400 (9M) | ||
*The Specifications are subject to change without prior notice.
Standard Accessories
- Inch / metric dual gear box
- 4-way toolpost with T slot
- Work light
- Coolant system
- Thread chasing dial
- Cross and Longitudinal rapid travel
- Longitudinal bar with travel dogs (for carriage stop)
- Magnetic brake for main spindle only
- Tool box with tools
- Manual
Options
- Upgrade spindle bore
- Upgrade spindle motor
- Chuck or face plate
- Adaptor for rear chuck
- Front chuck protection cover
- Rear chuck protection cover
- 4-position carriage stop
- Steady rest
- Follow rest
- Rear tool post
- Quick change tool post
- Boring bar tool holder
- Rapid threading attachment
- Auto feed on top slide
- Taper attachment
(±10 degree, stroke 500 mm) - Rotating center, MT7
- Full length rear splash guard(BC. 2M~5M)
- Moveable rear splash guard
- CE mark
