Description | TKV-860H | TKV-860HT | TKV-860HM | TKV-860HMT |
Capacity | ||||
Max. swing dia. | 1000 mm | |||
Max. turning dia. | 860 mm | 800 mm | ||
Std. turning dia. | 690 mm (860 mm, V-type turret only) |
800 mm | ||
Max. turning height | 810 mm (800 mm, V-type turret only) |
700 mm | ||
Spindle | ||||
Hydraulic chuck | 533 mm (21”) | |||
Range of table speed | 25-1500 rpm | |||
Front bearing dia. | 200 mm | |||
Spindle nose | A2-11 (OPT A2-15 ) | |||
Turret | ||||
Turret type | H12 (OPT V4 / V6 / V8) | H12+H12 | H12 | H12+H12 |
Number of tool position | 12 (OPT 4 / 6 / 8) | 12+12 | 12 | 12+12 |
Tool Size | Ø 25, Ø 32, Ø 40, Ø 50 mm | Ø 25, Ø 40, Ø 50 mm | ||
Feed | ||||
Rapid rate (X-axis) | 20 M/min | |||
Rapid rate (Z-axis) | 20 M/min | |||
Horizontal travel (X-axis) |
470 mm (-50 + 550 mm, V-type turret only) | |||
Horizontal travel (Z-axis) |
860 mm (850 mm, V-type turret only) | |||
Cutting federate | 0.001-500 mm/min | |||
Feed override | 0 - 150 % |
*The Specifications are subject to change without prior notice.

H12 Turret with milling (Turning)

H12 Turret

H12 Turret (Drilling)

Air condition for electrical cabinet

Special chuck (Options)

TKV-460H/HT/HM/HMT

V6 Turret

V4 Turret
Options

Second control box

Coolant system (3 bar and more)

High and low pressure of hydraulic chuck

Tool presetter

Oil mist collector

External counter for each insert

Oil skimmer (Disk type)

Finger hydraulic chuck

Simultaneous double tooling device

High torque main spindle motor with built-in dual speed gearbox
Table-speed and torque








Dimensions
Unit: mm

A | B | C | D | E | F | G | H | |
TKV-460H | 990 | 2855 | 1620 | 457 | 2780 | 1140 | 3430 | 650 |
TKV-760H | 1080 | 3440 | 1950 | 505 | 2980 | 1200 | 3670 | 710 |
TKV-860H | 1200 | 3900 | 2100 | 655 | 3288 | 1200 | 3870 | 860 |
TKV-1100H | 1250 | 4042 | 2710 | 755 | 3700 | 1250 | 4230 | 1030 |
TKV-460HM | 990 | 2815 | 1620 | 457 | 2780 | 1140 | 3430 | 650 |
TKV-760HM | 1080 | 3450 | 1950 | 505 | 2980 | 1200 | 3670 | 710 |
TKV-860HM | 1200 | 3872 | 2100 | 655 | 3288 | 1200 | 3870 | 860 |
(Option: V4 / V6 / V8)
A | B | C | D | E | F | G | H | |
TKV-460H | 980 | 2950 | 2220 | 400 | 2670 | 975 | 3435 | 630 |
TKV-760H | 1175 | 3680 | 2070 | 575 | 3180 | 1015 | 3855 | 845 |
TKV-860H | 1175 | 4000 | 2070 | 575 | 3180 | 1015 | 3855 | 845 |
TKV-1100H | 1250 | 4042 | 2710 | 755 | 3700 | 1250 | 4230 | 1030 |
Standard Tooling System (H12 Turret)
Unit: mm

Standard Tooling System (H12 Turret With Milling)
Unit: mm

Electrical Cabinet
Easy maintenance circuit arrangement.
Suitable all kinds of environment.
CE standard available.

CNC Controller

Fanuc 0i-T

Siemens 840D
Work Range: H12 Turret (Unit: mm)
TKV-460H



TKV-760H



TKV-860H



TKV-1100H



Tool Interference: (Unit: mm)




Standard Accessories
- Spindle orientation
- Manual 4-jaw chuck (for TKV-1100H)
- Hydraulic 3-jaw solid chuck & cylinder, size as spec (except TKV-1100H)
- Hydraulic power unit
- Soft jaw x 1 set for hydraulic chuck (except TKV-1100H)
- Foot switch for hydraulic chuck (except TKV-1100H)
- Automatic lubrication system
- Coolant through turret
- Coolant flushing system with tank
- Heat exchanger for electrical cabinet
- Splash guard
- Work light
- Warning light (R / Y / G)
- Workpiece counter (CNC Controller)
- Chain type chip converor & chip trolley
- Manual for operation & maintenance
- Manual for electrical & hydraulic circuit diagram
- Electronic manual for controller
- Tool box with tool kits
- Leveling bolts & pads
Options
- Higher power motor, αil 50 (45/55kw), αil 30 (30/37kw), αil 40(37/45kw)
- Extra hydraulic chuck & cylinder (for TKV-1100)
- Dual speed gear box for main spindle
- High & low pressure chucking
- Chuck position sensor
- Hard jaw of chuck
- Manual guide i
- Oil mist collector
- Auto door (Automatic opening & closing of main door)
- Special tool holder
- High pressure coolant through turret
- Tool presetter
- Turning tools
- External counter display for each insert
- Air condition for electrical cabinet
- Oil skimmer (Disk type)
- Scrap type chip conveyor with chip trolley
- Jig & fixture
- Turnkey project
- Power transtormer
- CE mark