- High productivity
- The AC digital wrap around spindle drive and motor are more accurate and responsive than traditional analog spindle drives and motors.
- TThe spindle performance is continuously monitored to provide the most efficient cutting conditions.
- TEach axis is independently controlled to provide maximum feed as required.
|Main motor (cont. / 30 min)||18.5 / 22 kw|
|Spindle speed (Max.)||5 – 2000 rpm|
|Spindle tapper||ISO 50 / BT-50|
|Spindle diameter||Dia. 110 mm|
|Spindle end diameter||Dia. 215 mm|
|Max. spindle torque||860 Nm|
|Work table travel X axis
|1500 mm||2000 mm||3000 mm|
|Spindle travel Y axis
|1500mm||1800 mm||2000 mm|
|Work table travel Z axis
|1100 mm||1300 mm||1500 mm|
|Spindle travel W axis||600 mm|
|Table dimension||1250 x 1400mm||1400 x 1600 mm||1600 x 1800 mm|
|T-slot||22 x 7 mm.||22 x 9 mm.||22 x 9 mm|
|Max. loading weight||6500 kg||8500 kg||10000 kg|
|Max. rotation diameter||1877 mm||2126mm||2408 mm|
|Table rotation speed||0.8 rpm|
|Rapid feed||XYZW axis||XYZ axis = 10000 / W axis = 3000 mm / min|
|Feed rate||X / Y / Z axis||1 – 5000 mm / min|
|W axis||1 – 3000 mm / min|
|Machine dimension (L x W x H)||5100 x 8350 x 4300 mm||5400 x 8350 x 4800 mm||6350 x 8900 x 4800 mm|
|Machine weight||26000 kg||29000 kg||32000 kg|
|Controller||Fanuc / Siemens / Heidenhain|
*The Specifications are subject to change without prior notice.
The AC digital wrap around spindle drive and motor are more accurate and responsive than traditional analog spindle drives and motors.
The spindle performance is continuously monitored to provide the most efficient cutting conditions.
Each axis is independently controlled to provide maximum feed as required.
CBA Series box way
These highly rigid box way structures give you the very best machine durability.
The material is high-frequency-heat-treat for stress relief.
The 4-in-1 design for CBA-110R and CBA-110R2 bed slide ways enhance the cutting capabilities in the Z-axis.
This special combination of highly rigid box ways, ball screws, and worm gear automatic lubrication system provides a highly satisfying compact rotary table design.
With the Heidenhain angle encoder installed in the rotary table center shaft, combined with our specially designed hydraulic clamping system and positioning index pins, our machines can achieve any cutting angle.
Reinforced heavy cutting angles at 0∘, 90∘, 180∘and 270∘are included features.
Hence resulting in superior accuracy and cutting efficiency.
Ease of operation
Fanuc, Siemens, and Heidenhain control panels are available options.
These value added features will enhance your working capability, efficiency, and much more.
We are sure that you will be very satisfied with the high level of quality and improved machine performance.
High precision slide ways
Our auto grease lubricating system provides several advantages for the overall machine capability.
It not only maintains high accuracy during the long working hours, but also functions perfectly with low speed machining.
The high precision ball screw axis transmission provides superior machine stability resulting in highly accurate work pieces.
The CBA-110R3 provides 2 additional linear slide ways to enhance durability and eliminate unwanted deflection.
This significantly improves machine cutting accuracy.
Face plate FH-500
U axis travel : 160mm
|Automatic tool changer (Optional accessories)|
|Tool capacity||24 / 32 / 40 / 60|
|Tool shank||MAS 403 BT-50|
|Pull stud||MAS 403 P50T-1|
|Tool weight||25 kg|
|Max. tool length||300 mm|
|Max. tool diameter||Dia. 125 mm (Dia. 250 mm)|
The specially designed spindle outer ring cooling system maintains constant bearing accuracy under normal operating conditions.
This gear type auto-shift design and grease lubrication system also provides superior machine performance and reliability.
The spindle and boring bar are made of SACM645 alloy.
The spindle has been Nitrided to HRC62~68.
This hardness maintains spindle form and insures high reliability.
This increased rigidity increases the overall machine capability.
We use the very highest quality spindle Bearings from SKF and NSK.
These high quality bearings insure machine consistency and a longer machine life.
- Tools and tool box
- Foundation screws and bolts
- Spindle oil cooler
- Spindle box vertical movement counter weight
- Work lamp
- Electronic cabinet cooler
- X axis dust cover
- Y axis dust cover
- Z axis dust cover
- MPG (manual pause generator)
- Automatic lubrication system
- Screw chip conveyor
- Steel belt chip conveyor with cart
- ATC (automatic tool changer)
- Coolant through spindle
- Linear scale
- Spindle support
- Face plate
- Splash guard for rotary table
- Splash guard for operator
- Work piece measuring device