| Model | TNC-460N | TNC-540N | TNC-630N | |||
| Swing over bed | Ø 460 mm (18") | Ø540 mm (21") | Ø 630 mm (25") | |||
| Swing over cross slide | Ø 230 mm (9") | Ø310 mm (12") | Ø 400 mm (15") | |||
| Center height | 230 mm (9") | 270 mm (10.6") | 315 mm (12") | |||
| Distance between centers |
1000 mm (40") / 1500 mm (60") / 2000 mm (80") | |||||
| Width of bed | 350 mm (13.8") | |||||
| Spindle nose | D1-6 | D1-8 | A2-11 (OPT) |
D1-8 | A2-11 (OPT) |
A2-11 (OPT) |
| Auto change spindle speed ( 3 steps ) |
H :681 - 3000rpm M :153 - 680rpm L :33 - 152rpm |
H :491 - 2250rpm M :126 - 490rpm L :27 - 125rpm |
H :331 - 1500rpm M :93 - 330rpm L :20 - 92rpm |
H :491 - 2250rpm M :126 - 490rpm L :27 - 125rpm |
H :331 - 1500rpm M :93 - 330rpm L :20 - 92rpm |
H :176 - 800rpm M :53 - 175rpm L :10 - 52rpm |
| Spindle bore | Ø 56 mm (2.2") | Ø 85 mm (3.3") | Ø 105mm (4") | Ø 85mm (3.3") | Ø 105mm (4") | Ø 153mm (6") |
| Longitudinal travel (Z axis) |
810 mm (31.8") / 1310 mm (51.5") / 1810 mm (71.2") | |||||
| Cross slide travel (X axis) |
280 mm | 350 mm | ||||
| Cross slide width | 190mm (7.3") | 125 mm (5") | ||||
| Size of tool post shank | 25 mm x 25 mm (1 x 1") | |||||
| Tailstock quill diameter | Ø75 mm (2.95") | |||||
| Tailstock quill travel | 170 mm (6.6") | |||||
| Tailstock quill taper | MT5 | |||||
| Spindle motor | 7.5 HP / 10 HP OPT) | 10 HP / 15 HP OPT) | ||||
| Drives (X, Z) | SERVO | |||||
| Rapid traverse X, Z | 5000, 7000 mm / min. | |||||
| Range of feeds in manual mode | 0.01-500 mm / rev. | |||||
| Coolant pump motor | 1/6 HP | |||||
| Machine weight | 2900 kgs / 3200 kgs / 3500 kgs | 3100 kgs / 3400 kgs / 3700 kgs | 3200 kgs / 3500 kgs / 3800 kgs | |||
*The Specifications are subject to change without prior notice.
Work Range
| Model | TNC460N / 540N / 630N x 1000 | TNC460N / 540N / 630N x 1500 | TNC460N / 540N / 630N x 3000 |
| A1 | 1000 mm (40") | 1500 mm (60") | 2000 mm (80") |
| B1 | 804 mm (32") | 1304 mm (51") | 1804 mm (71") |
| C1 | 800 mm (32") | 1300 mm (51") | 1800 mm (71") |
Controller features
Wider selections
Manual operation with D.R.O. function.
Semi-auto operation with auto feeding.
Fully CNC operated lathes.
Easy operation
Interactive graphic data entry.
Operations defined by symbol keys.
Semi, fully-auto operation modes.
More advantages
Automatic part repetition for mass production.
32 tool magazine.
Part-operation sequence storage.
Tool data back-up.
Hardware & operation functions
9” VGA high resolution monochrome monitor
Integrated PLC
8 bit bus, 32K RAM
Serial port(RS232 communication)
Teach-in mode
Semi-automatic, automatic (Cycle) and part program modes
Automatic acceleration/deceleration
Rapid traverse
Self diagnostic routines
Constant surface speed (CSS)
Two electronic handwheels
Automatic home searching
Program input via RS-232 or floopy disk (option)
Control panel function keys
Auxiliary functions key
Axis selection
Begin/End points entry
Constant surface speed
Coolant on/off key
Cycle start/Cycle stop
Emergency stop
Feed and rapid override
Feedrate entry
Icon keys for operations
Inc/abs coordinate selection
Jog selection
New tool selection
Numeric keyboard
Output active/deactive keys
Parameter keys for operations
Recall function
Reset
Single pass mode
Spindle forward/reverse/off
Spindle override
Spindle speed max. limitation in CSS
Zoom window function
Machine construction brief
Head stock
3 points bearing supported spindle, ground and hardened gear, will lubricant and gear oil bathing system.
Bedway
Meehanite FC-30 casting, heat-treat hardened, HS-700 hardness, precision groung, auto-lubricating system, high accurate ballscrews for X & Z axis.
More standard functions of the controller
Display
Programming
Tooling compensation
Automatic operations
Turning cycle
Facing cycle
Taper turning cycle
Rounding cycle
Threading cycle
Grooving cycle
Straight section profiling cycle:
-Pattern repeating
-Stock removal
Sample drilling cycle
Tapping cycle
Finishing pass conditions setup:
-Finish stock to be removed
-Finishing federate
-Safety distance
Two execution levels:
-Semi –automatic & automatic (cycle)
Dimension
| Model | A | B | C |
| TNC460N / 540N / 630N x 1000 | 2720 mm (107.1") | 1870 mm (73.6") | 1900 mm (78.4") |
| TNC460N / 540N / 630N x 1500 | 3220 mm (126.8") | 1870 mm (73.6") | 1900 mm (78.4") |
| TNC460N / 540N / 630N x 3000 | 3720 mm (146.5") | 1870 mm (73.6") | 1900 mm (78.4") |
Standard Accessories
- Auto lubrication system
- Coolant system
- Full splash guard
- RS-232 port
- Work light
- Adapter sleeve
- Two dead centers
- Leveling bolts & pads
- Tool box with tools
- Inspection record
- Operation & service manual
Options
- Larger spindle motor
- 3-jaw chuck
- 4-jaw chuck
- Face plate
- Steady rest
- Follow rest
- Rotation center, MT5
- Hydraulic tailstock
- 4 stations manual toolpost
- Quick change toolpost
- 4 stations electric turret
- 8 stations hydraulic turret with direct type disk
- Chip conveyor
- CE mark
