| Description | FA45H | FA50H | FA55H | FA60H | FA70H | FA80H | FA100H |
| Capacity | |||||||
| Swing over bed | 1170 mm (46”) | 1300 mm (51") | 1430 mm (56") | 1560 mm (61") | 1800 mm (70") | 2050 mm (80") | 2550mm(100.3") |
| Swing over cross slide (Half length) |
845 mm (33.2”) | 965 mm (38") | 1090 mm (42.9") | 1215 mm (47.8") | 1465 mm (57.6") | 1715 mm (67.5") | 2215 mm (87.2") |
| Swing over cross slide (Full length) |
720 mm (28.3”) | 850 mm (33.5") | 980 mm (38.6") | 1110 mm (43.7") | 1370 mm (53.9 | 1630 mm (64.1") | 2150 mm (84.6") |
| Center Height | 585 mm (23”) | 650 mm (25.6") | 715 mm (28.1") | 780 mm (30.7") | 910 mm (35.8") | 1040 mm (40.9") | 1250 mm (49.2") |
| Distance between centers | 2150 - 14150 mm (84”) - (557”) | ||||||
| Bed width / Auxiliary guide | 1020 mm (40") / 1170 mm (46”) | ||||||
| Width of cross slide | 420 mm (16.5") | ||||||
| Width of carriage | 950 mm (37.4") | ||||||
| Spindle | |||||||
| Spindle nose | A2-15 | ||||||
| Spindle bore | Dia. 200 mm (8") | ||||||
| Spindle speeds | 5-225 rpm | ||||||
| Spindle center | MT6 | ||||||
| Turret | |||||||
| Turret | H4-450 Servo or V8 Hydraulic | ||||||
| Tool size | 32 x 32 mm (1.25") | ||||||
| X axis travel (Half length cross slide) |
600 mm (23.6") | ||||||
| X axis travel (Full length cross slide) |
900 mm (35.4") | ||||||
| Z axis travel | 2150 mm (45.3") – 14150 mm (557") | ||||||
| X axis rapid travel Ball screw dia. |
6M / min, dia. 40 mm x P5 | ||||||
| Z axis rapid travel Ball screw dia. |
6M / min,1-5M (dia. 63 mm x P10); 5M / min, 6-7M (dia. 80 mm x P10) 5M / min, 8-14M (Rack and Pinion Driver) |
||||||
| Tailstock | |||||||
| Tailstock quill diameter | 350 mm (13.7”) | ||||||
| Tailstock quill travel | 300 mm (11.8") | ||||||
| Tailstock center | MT6 | ||||||
| Motor | |||||||
| X axis servo motor | FANUC αiF22 4kw | ||||||
| Z axis servo motor | 2-3M FANUC αiF22 4 kw, 4-7M FANUC αiF22 4 kw (Gear Box) 8-14M FANUC αiF40 6 kw (Rack and Pinion Driver) |
||||||
| Spindle motor | FANUC αiI 40 37 / 45 kw (50 / 60 HP) | ||||||
| Lubricant pump motor | 25 W | ||||||
| Coolant pump motor | 1.2 kw | ||||||
| Hydraulic pump motor | 2.25 kw | ||||||
| Machine Weight | |||||||
| 2000 mm center distance | 18500 kgs | 19000 kgs | 19600 kgs | 20200 kgs | 21400 kgs | 22600 kgs | 26500 kgs |
| Each extra 1000 mm weight | 1500 kgs | ||||||
*The Specifications are subject to change without prior notice.
Work Range (Full length cross slide)
Unit: mm
| Model | A | B | C | D |
| FA45N / H | 1170 | 720 | 585 | 685 |
| FA50N / H | 1300 | 850 | 650 | 685 |
| FA55N / H | 1430 | 980 | 715 | 685 |
| FA60N / H | 1560 | 1110 | 780 | 775 |
| FA70N / H | 1800 | 1370 | 910 | 775 |
| FA80N / H | 2050 | 1630 | 1040 | 865 |
Work Range (Half length cross slide)
Unit: mm
| Model | A | B | C | D |
| FA45N / H | 1170 | 845 | 585 | 539 |
| FA50N / H | 1300 | 965 | 650 | 592 |
| FA55N / H | 1430 | 1090 | 715 | 645 |
| FA60N / H | 1560 | 1215 | 780 | 698 |
| FA70N / H | 1800 | 1465 | 910 | 804 |
| FA80N / H | 2050 | 1715 | 1040 | 910 |
Work Range (Full length cross slide)
Unit: mm
| C | D | |
| 6" | 81 | 225 |
| 9" | 82 | 227 |
| 12" | 88 | 235 |
FA-H Demension
Unit: mm
FA-H Spindle Torque- Power Diagram
FANUC ail40/ 6000 Motor
| speed [rpm] | Torque [kg-m] | ||||||||||
| S2 | S3 | S4 | S5 | S6 | T1 | T2 | T3 | T4 | T5 | T6 | |
| Motor | 1500 | 3000 | 4000 | 4500 | 6000 | 10 | 20 | 25.41 | 30 | 31.34 | 40 |
| Spindle M41 i=0.00359 | 5 | 11 | 14 | 16 | 22 | 2786 | 5571 | 6692 | 8139 | 8357 | 11142 |
| Spindle M42 i=0.00794 | 12 | 24 | 32 | 36 | 48 | 1259 | 2519 | 3025 | 3680 | 3778 | 5038 |
| Spindle M43 i=0.0227 | 34 | 68 | 91 | 102 | 136 | 441 | 881 | 1058 | 1287 | 1322 | 1762 |
| Spindle M44 i=0.05025 | 75 | 151 | 201 | 226 | 302 | 199 | 398 | 478 | 581 | 597 | 796 |
Options
Follow Rest (3 V Bed Way)
Steady Rest
B Axis
Hyd. Steady Rest
Y Axis With Indexing Table
Quick Change System
Hydraulic Disk Brake and Rear Chuck Adaptor
Grinding Head
Heavy Cutting Milling Head
Roller Support Bracket
Boring Bar and Holder
Double Turrets
C Axis Gear System with Reducer
Standard Accessories
- Fanuc control and motors
- 8” spindle bore
- H4 or V8 hydraulic turret
- Auto coolant, hydraulic and lubrication system
- Box way on cross slide
- Splash guard
- Hydraulic tailstock with rotating quill
- Front and rear chip conveyor
- Work light
- Tool box with tools
Options
- Extra spindle bore, motor and speeds
- Spindle oil chiller
- Hydraulic / manual chuck
- Face plate
- C axis or Spindle 5/15 degree indexing
- Y axis
- Driving Tool Turret
- Steady rest, follow rest
(Hydraulic or Manual) - Special boring bar holder
- Heavy duty milling attachment
- Grinding head on turret or cross slide
- Tool presetter
- Higher coolant pressure
- CE Mark
- Transformer
Heavy duty CNC lathe (LC/LD/FA series)
Spindle balance test for heavy duty CNC lathe
Spindle gear box for heavy duty CNC lathe
Spindle design for heavy duty CNC lathe
Heavy duty Y axis milling by heavy duty CNC lathe
Reaming process by heavy duty CNC lathe
Heavy milling by heavy duty CNC lathe
Heavy boring by heavy duty CNC lathe
Heavy tapping by heavy duty CNC lathe
Heavy duty CNC Lathe
