Close Menu

Conventional Lathe

TK960/1060/1200

Heavy duty model

 
Description TK 960 TK 1060 TK 1200
Capacity
Swing over bed 960 mm (37.7") 1060 mm (41.7") 1170 mm (46")
Swing over cross slide 650 mm (25.5") 750 mm (29.5") 860 mm (33.8")
Swing over gap 1510 mm (59.4") 1610 mm (63.3") 1720 mm (67.7")
Center height 480 mm (18.8") 530 mm (20.8") 585 mm (23")
Width of gap 570 mm (22.4")
Bed width / Auxiliary guide 560 mm (22") / 660 mm (25.9")
Between centers 2M, 3M, 4M, 5M, 6M, 7M,8M,9M
Headstock
Spindle bore,dia. Ø 156 mm (6")
[Opt. 230 mm (9") ]
Ø 156 mm (6")
[Opt. Ø 230 mm (9") , Ø 310 mm (12" )
Ø 360 mm (14") ]
Spindle nose A2-11
[Opt. A2-15]
A2-11
[Opt. A2-15, A2-20]
Spindle speeds (rpm), 12steps 9-600
[Opt. 6-400]
9-600
[Opt. 6-400, 5-300]
Main spindle motor 25 HP (Opt. 30HP)
Feed and Threads
Cross travel 540 mm (21.2")
Cross feeds 0.065-0.96 mm / rev (48 kinds)
Longitudinal feeds 0.13-1.92 mm / rev (48 kinds)
Lead screw diameter Ø 50 mm (1.9") x 2TPI
Threading range, Metric 2-30 mm / pitch (44 kinds)
Threading range, Inch 1-15 TPI (48 kinds)
Module pitch threads 1-15 M (32 kinds)
DP. Pitch threads 2-30 P (48 kinds)
Compound rest travel 300 mm (11.8")
Tool size 40 x 40 mm (1.5 x1.5")
Rapid motor 1/2HP
Tailstock
Quill Diameter Ø 140 mm (5.5") [Opt. bigger quill Diameter]
Center taper MT6
Quill travel 300 mm (11.8")

*The Specifications are subject to change without prior notice.

Copy device with 120mm stroke length

Semi-automatic rapid threading attachment

Heavy duty cast iron tailstock body

MT6 taper quill movement by 2 speed reduction box and handwheel

Heavy duty taper attachment

Standard Accessories

  • Inch/metric dual gear box
  • 4-ways toolpost with T slot
  • Work light
  • Coolant system
  • Thread chasing dial
  • Cross & longitudinal rapid travel
  • Longitudinal bar with travel dogs (for carriage stop)
  • Magnetic brake for main spindle
  • Tool box with tools
  • Manual

Options

  • Upgrade spindle bore
  • Upgrade spindle motor
  • Chuck or Face plate
  • Adaptor for rear chuck
  • Front chuck protection cover
  • Rear chuck protection cover
  • 4-position carriage stop
  • Steady rest
  • Follow rest
  • Rear tool post
  • Quick change tool post
  • Boring bar tool holder
  • Rapid threading attachment
  • Auto feed on top slide
  • Taper attachment (±10 degree, stroke 500mm)
  • Rotating center, MT7
  • Full length rear splash guard (BC. 2M-5M)
  • Movable rear splash guard
  • CE mark

TK-960/1060 sries