Close Menu

Conventional Lathe

TK450/540/630

  • Optimal design for excellent turning performance.
  • High rigidity one piece cast iron base.
 
Description TK450 TK540 TK630
Capacity
Swing over bed, mm 460 (18.1") 540 (21") 630 (25")
Swing over cross slide, mm 290 (11.4") 360 (14") 450 (17.7")
Swing over gap, mm 640 (25"), Opt. 720 (28.3"), Opt. 810 (31.9"), Opt.
Between centers, mm 1000/1500/2000
(40", 60", 80")
1000/1500/2000/3000
(40", 60", 80", 120")
1000/1500/2000/3000
(40", 60", 80", 120")
Headstock
Spindle bore, mm 56 (2.2") 85 (3.3"),
105 (4"), Opt.
85 (3.3"),
105 (4") /153 (6"), Opt.
Spindle nose D1-6 D1-8, A2-11, Opt D1-8, A2-11, Opt
Spindle speeds, rpm (steps) 39-2800 (18) 25-1545 (18) 25-1545 (18)
Spindle motor, HP 7.5 / 10, Opt 10 / 15, Opt 10 / 15, Opt
Threads
Lead screw 4 TPI or 6 mm / pitch
Metric / pitch, range 0.5 - 7 mm / pitch (24 kinds)
Inch, range 4 - 56 TPI (36 kinds)
Module / pitch, range 0.25 - 3.5 M (16 kinds)
DP, range 8 - 112 P (36 kinds)
Feeding Range
Longitudinal feeds, mm/rev. 0.06-0.88 0.06-0.88 0.06-0.88
Cross feeds, mm/rev. 0.03-0.44 0.03-0.44 0.03-0.44
Tailstock
Quill dia. / Center taper, mm 75 (2.95") / MT5 75 (2.95") / MT5 75 (2.95") / MT5
Travel, mm 170 (6.69") 170 (6.69") 170 (6.69")
Miscellaneous
Bed width, mm 350 (13.78") 350 (13.78") 350 (13.78")
Cross slide travel, mm 280 (11") 305 (12") 330 (13")
Compound rest travel, mm 120 (4.7") 150 (5.9") 150 (5.9")
Coolant pump motor, HP 1/8 1/8 1/8

*The Specifications are subject to change without prior notice.

Headstock

Gears in the headstock are machined form chrome molybdenum ally steel (SCM-21), carburized and precision ground for extremely smooth and quiet running.

Apron

Special interlock design at apron to prevent Z axis feed and thread cutting act at the same time.

Tailstock

The tailstock in rigidly constructed, move along the bed easily.


TK450 x 1500

TK630 x 1500

Standard Accessories

  • Center sleeve
  • Dead center
  • Work light
  • Thread chasing dial
  • Coolant system
  • Tool box with tools
  • Manual

Options