Close Menu

Conventional Lathe

TK1800N/2000N/2500N

Heavy duty model

 
Description TK 1800N TK 2000N TK 2500N
Capacity
Swing over bed 1775 mm (69.88") 1975 mm (77.75") 2500 mm (98.42")
Swing over cross slide
(Full length)
1350 mm (53.14") 1550 mm (61.02") 2050 mm (80.7")
Swing over cross slide
(Half length)
1530 mm (60.23") 1720 mm (67.71") 2200 mm (86.61")
Center height 900 mm (35.43") 1000 mm (39.37") 1250 mm (49.21")
Between centers 3000-12000 mm (120"-480")
Bed width / Auxiliary guide 1345 mm (52.95") / 1550 mm (61.02")
Headstock
Spindle bore,dia. Dia. 210 mm (8.2")
Spindle nose A2-15
Spindle speed (rpm), steps 6-400 rpm
Spindle motor 75 HP
Feed and Threads
Cross feed 0.056-0.96 mm / rev(45 kinds)
Cross slide travel 1250 mm (Full length) / 510mm (Half length)
Compound rest travel X1: 250mm manual feeding / Z1: 400mm auto feeding
Tool size 50 x 50 mm (2 x 2")
Longitudinal feeds 0.13 - 1.92 mm / rev (48 kinds)
Lead screw Ø 60 mm x 2 TPI (Inch) or Ø 60 mm x 12 mm (Metric)
Threading range, Metric 2-30 mm / pitch (48 kinds)
Threading range, Inch 1 -15 TPI (48 kinds)
Module pitch threads 1-15 M (32 kinds)
DP. Pitch threads 2-30 HP (45 kinds)
Tailstock
Quill Diameter Ø 290 mm (11.4") heavy duty rotating quill
Center taper MT7
Quill travel 300 mm (11.81")

*The Specifications are subject to change without prior notice.

Dia. 290mm high rigidity rotation quill with A2-11 nose and MT7 inner taper movement by 2 speed reduction box and handwheel.
Tailstock body position movement by electric motor.


Heavy duty roller support bracket

Cross and longitudinal compound rest


TK2500N x 3000

Standard Accessories

  • Inch/metric dual gear box
  • 4-way toolpost with T slot
  • Work light
  • Coolant system
  • Thread chasing dial
  • 6-way rapid travel
  • Main motor with inverter
  • Hydraulic spindle disk brake
  • Magnetic brake for main spindle
  • Auto lubrication system
  • Electric motor for tailstock body movement
  • Tailstock rotating quill
  • Sleeve & centers
  • Leveling bolts & pads

Options

  • Upgrade spindle bore
  • Upgrade spindle motor
  • Chuck or Face plate
  • Adaptor for rear chuck
  • Front chuck protection cover
  • Rear chuck protection cover
  • Boring bar tool holder (Full length cross slide only)
  • Steady rest
  • Follow rest
  • Rear tool post
  • Digital read out
  • Heavy duty roller support bracket
  • CE mark