Close Menu

Conventional Lathe

TK1200N/1400N/1600N

Heavy duty model

 
Description TK 1200N TK 1400N TK 1600N
Capacity
Swing over bed 1190 mm (46.8") 1385 mm (54.5") 1580 mm (62.2")
Swing over cross slide 830 mm (32.6") 1030 mm (40.5") 1230 mm (48.4")
Swing over gap 1750 mm (68.8") 1950 mm (76.7") 2150 mm (84.6")
Center height 600 mm (23.6") 700 mm (27.5 ") 800 mm (31.4")
Width of gap 600 mm (23.6")
Bed width / Auxiliary guide 800 mm (31.4") / 1000 mm (39.3")
Between centers 2M, 3M, 4M, 5M, 6M, 7M, 8M, 9M, 10M, 11M, 12M, 13M, 14M
Headstock
Spindle bore,dia. Ø 230 mm (9") [Opt. 310 mm (12"), Ø 360 mm (14"), Ø 535 mm (21")]
Spindle nose A2-15
[Opt. A2-20, A2-28]
Spindle speeds (rpm), 12steps 6-400
[Opt. 5-300, 3-230]
Main spindle motor 30HP [Opt. 40HP or 50HP]
Feed and Threads
Cross travel 780 mm (30.7")
Cross feeds 0.065-0.96 mm / rev (48 kinds)
Longitudinal feeds 0.13-1.92 mm / rev (48 kinds)
Lead screw diameter 50 mm (1.9") x 2 TPI
Threading range, Metric 2-30 mm / pitch (44 kinds)
Threading range, Inch 1-15 TPI (48 kinds)
Module pitch threads 1-15 M (32 kinds)
DP. Pitch threads 2-30 P (48 kinds)
Compound rest travel 320 mm (12.6")
Tool size 50 x 50 mm (2 x 2")
Rapid motor 1 HP
Tailstock
Quill Diameter Ø 200 mm (7.87") [Opt. Ø 290 mm (11.41") rotating type]
Center taper MT7
Quill travel 300 mm (11.8")

*The Specifications are subject to change without prior notice.

Copy device with 120mm stroke length

Semi-automatic rapid threading attachment

Heavy duty cast iron tailstock body

MT6 taper quill movement by 2 speed reduction box and handwheel

Heavy duty taper attachment


TK1600N x 4000

Standard Accessories

  • Inch/metric dual gear box
  • 4-ways toolpost with T slot
  • Work light
  • Coolant system
  • Thread chasing dial
  • Cross & longitudinal rapid travel
  • Longitudinal bar with travel dogs (for carriage stop)
  • Magnetic brake for main spindle
  • Tool box with tools
  • Manual

Options

  • Upgrade spindle bore
  • Upgrade spindle motor
  • Chuck or Face plate
  • Adaptor for rear chuck
  • Front chuck protection cover
  • Rear chuck protection cover
  • 4-position carriage stop
  • Steady rest
  • Follow rest
  • Rear tool post
  • Quick change tool post
  • Boring bar tool holder
  • Rapid threading attachment
  • Auto feed on top slide
  • Taper attachment (±10 degree, stroke 500mm)
  • Rotating center, MT7
  • Full length rear splash guard (BC. 2M-5M)
  • Movable rear splash guard
  • CE mark