Vertical Machining Center
VMC-1100S/1270S/1400S/1500S/1700S/2000S
- VMC-1100S/1270S/1400S
Travel: 1140 / 1300 / 1400 x 710 x 610mm
Box slide way on X, Y & Z axis (linear guide way OPT)
Rapid feed rate: 20 / 20 / 16 M/min. (24 / 24 / 24 OPT) - VMC-1500S/1700S/2000S
Travel: 1500 / 1700 / 2000 x 900 x 850mm
Box slide way on X, Y & Z axis
Rapid feed rate: 16 / 16 / 12 M/min
| Description | VMC-1100S | VMC-1270S | VMC-1400S | VMC-1500S | VMC-1700S | VMC-2000S | ||
| Table | ||||||||
| Table Size | 1300 x 700 | 1500 x 700 | 1600 x 700 | 1700 x 850 | 2000 x 850 | 2200 x 850 | ||
| Travel Ranges (X / Y / /Z mm) |
1100 / 710 / 610 | 1300 / 710 / 610 | 1400 / 710 / 610 | 1500 / 900 / 850 | 1700 / 900 / 850 | 2000 / 900 / 850 | ||
| Max. Table Load (kgs) | 1000 | 1200 | 1500 | 2000 | 2500 | 3000 | ||
| Spindle Nose to Table Surface (mm) | 110 ~ 710 | 150 ~ 1000 | ||||||
| T- Slots (Width x Distance x Number mm) |
18 x 125 x 5 | 18 x 150 x 5 | ||||||
| Spindle | ||||||||
| Tool Shank & Pull Stud | ISO 40 | ISO 50 (OPT) | ISO 40 | ISO 50 | ||||
| Spindle inner Diameter (mm) | Ø 70 | Ø 100 | Ø 70 | Ø 100 | ||||
| Spindle Center to Column (mm) | 760 | 950 | ||||||
| Spindle Speed (rpm) Belt | 40 - 8000 | 40 - 6000 (8000) | 40 ~ 8000 | 40 ~ 6000 (8000) | ||||
| Spindle Speed (rpm) Gear box | L40 ~ 1750, H1751 ~ 8000 | L40 ~ 1500, H1501 ~ 6000 | L40 ~ 1500, H1501 ~ 8000 | L40 ~ 1500, H1501 ~ 6000 | ||||
| Draw Bar Force (Kgf) | 950 | 2000 | 950 | 2000 | ||||
| Main Motor (Con / 30min kw) |
7.5 / 11 | 11 / 15 | 11 / 15 | 15 / 18.5 | ||||
| Feed Rate | ||||||||
| Rapid Feed Rate (X/Y/Z m/min) |
20 / 20 / 16 | 16 / 16 / 12 | ||||||
| Feed Rate (X/Y/Z m/min) |
10000 | 8000 | ||||||
| AC Servo Motor | ||||||||
| Mitsubishi (kw) | HF353 (3.5) | HF300 (4.5) | HA700 (7.0) | |||||
| Fanuc (kw) | βiS 22 (2.5) or aiF 22 (4.0) | αiF 22 (4.0) | αiF 30 (7.0) | |||||
| Siemens (kw) | 1FK7083 (4.17) | 1FK7101 (7.03) | ||||||
| Fagor (kw) | FXM64.3 (5.2) | FXM75.2 (7.04) | ||||||
| Heidenhain (kw) | QSY155D (5.68) | QSY155F (6.0) | QSY190D (9.6) | |||||
| Auto Tool Changer | ISO 40 | ISO 50 (OPT) | ISO 40 | ISO 50 | ||||
| Mag Type | PLATE / DISK | DISK / CHAIN | PLATE / DISK | DISK / CHAIN | ||||
| Cam Type | GENOVA / DAUL ARM | DAUL ARM | GENOVA / DAUL ARM | DAUL ARM | ||||
| Tool Selection (Bi-direction) |
ABSOLUTE / RAMDOM | RAMDOM | ABSOLUTE / RAMDOM | RAMDOM | ||||
| Tool Storage Capacity (pcs) | 20 / 24 | 24 / 32 | 20 / 24 | 24 / 32 | ||||
| Max. Tool Diameter (mm) | Ø 90 / Ø 100 | Ø 115 / Ø 127 | Ø 90 / Ø 100 | Ø 115 / Ø 127 | ||||
| Max. Tool Length, Weight | 250 mm, 8 kgs | 350 mm, 15 kgs | 250 mm, 8 kgs | 350 mm, 20 kgs | ||||
*The Specifications are subject to change without prior notice.
VMC-1500S/1700S/2000S
- Travel: 1500 / 1700 / 2000 x 900 x 850mm
- Box slide way on X, Y & Z axis
- Rapid feed rate: 16 / 16 / 12 M/min
- Spindle Motor 1500S: 20HP / 1700S & 2000S: 25HP
- ISO 40 (Belt) 8,000 rpm, (10,000 rpm OPT)
- ISO 50 (Gear) 6,000 rpm
VMC-1100S/1270S/1400S
- Travel: 1140 / 1300 / 1400 x 710 x 610mm
- Box slide way on X, Y & Z axis (linear guide way OPT)
- Four slide ways on Y axis
- Rapid feed rate: 20 / 20 / 16 M/min. (24 / 24 / 24 OPT)
- Spindle Motor 1100S: 15HP / 1270S & 1400S: 20HP
- ISO 40 (Belt) 8,000 rpm, (10,000 rpm OPT)
- ISO 50 (Gear) 6,000 rpm
- StructureThe major parts on this series are constructed of high-quality robust FC30 Meehanite castings, hardened to over HRB190 and tempered to relieve stress.
- Spindle HeadA box-shape construction design on spindle head, providing high rigidity to increase cutting ability.
- Ballscrew3 axes are equipped with 50mm diameter C3 class high precision ballscrews, mounted with double ballscres support bearings (P4 class), ensuring high positioning accuracy and durability.
- Solid SlidewaysSlideways are hardened with high-frequency heat treatment to reach hardness HRC55 with 2mm depth. Slideway surfaces are coated with Teflon combined with precision scraping. Scraped points and areas meet rigorous standard to assure high operational performance.
- 3 Axes AssemblyThe 3 axes are equipped with class C3 precision ball screws. All parts are modular design. Each step during assembly is rigorously controlled to ensure perfect quality. The 3 axes ball screws are pre-tensioned before assembly to avoid deformation that may affect machining accuracy. Cutting feed rate is up to 10 meters per minute.
ISO 40 Belt type
ISO 50 Gear type
- Counter Weight Balance SystemExclusively designed counter weight balance system. The counter-balance weight moves on a guide shaft to assure movement straightness accuracy.
There is no vibration in the forward / backwards and in the right / left directions. This creates superior workpiece surface accuracy to meet various mold machining requirements. - Control SystemThe centralized control panel employs a touch sensing screen for user-friendly operation. The humanized design control panel has an elegant appearance.
Various controllers can be chosed: Mitsubishi, Heidenhain, Fanuc, Siemens, Selca, ECS and PC-based controllers. - Splash GuardThe full splash guard meets environmental protection and CE requirements. It offers user a comfortable working environment.
- Automatic Lubrication SystemThe Lubrication System automatically measures and accurately distributes the oil to the slide ways, ballscrews and bearings.
Couplings
Directly connected with ball screw and AC servo motors, the high precision coupling offers the best rigidity and keeps the accuracy of axial linear assembly under high speed movement.
Chips Flushing Nozzles
Coolant flushing nozzles on rear inner wall of guard prevent jam of chips during operation.
Spindle
Supported by superior precision P4 class bearings, the spindle provides extra wide range machining capacity and high speed. Floating unclamping system assures tool unclamping force will not transmit to the spindle bearings. It provides stable tool camping and unclamping with spindle and extends the spindle bearings life. (standard)
24 Tools Arm Type ATC
The 24 Tools arm type ATC is activated by electric motor transmitted by U-cam mechanism, featured with the fastest tool change speed. (standard)
Ball Bar Circle Inspection
The reference data of ball bar circle testing identifies geometric errors of circular path.
Options
32 Tools Chain Type ATC
Chain type magazine is driver by cam system and featuring rapid and precise locating, quick tool changing and stability during-time application.
Gear Box
The Gear Box offers high torque and provides heavy cutting capability.
Coolant Through Spindle
Coolant circulates through spindle offer a direct cooling effect on tools, removing heat occurred during machining.
Chip Conveyor
Chip conveyor device in the front side of machine removes chips efficiently.
Standard Accessories
- Mitsubishi M70 controller
- 24 tools arm type ATC
- Spindle oil Chiller
- Cutting air blower
- Coolant & auto lubrication system
- Full splash guard
- Telescope steel cover
- Heat exchanger for electrical cabinet
- Rigid tapping
- Remote MPG
- RS-232C
- Operation status light
- Work light
- Tool box & tools
- Leveling bolts & pads
- Operation & program manuals
Options
- Higher spindle speed with oil chiller
- Higher coolant pressure
- Coolant through spindle
- Coolant through tool holder
- 32 tools ATC, chain type
- Auto tool length measurement
- Chip conveyor
- Ball screw oil cooling system
- 4th axis CNC rotary table
- Other controller selection
- Transformer
- CE Mark
