关闭选单

斜床身CNC车床

TNC-N200DS/DS-B/DST/DST-B, TNC-N200/N250/N300

  • Slant bed with wider bedways, provide high accuracy and high performance
  • Precision ballscrews in each axis, supported by angular roller bearing
  • High position accuracy and repeatability
  • Lower thermal deformation and vibration
  • Forced lubrication system assure longer life time
  • Automatic chip conveyor for easy chip sweep
  • Guideways are used by linear motion guideway
 
Description TNC-N200DS TNC-N200DS-B TNC-N200DST TNC-N200DST-B
Capacity
Swing over bed Ø 600 mm (23.6") Ø 650 mm (25.6") Ø 620 mm (24.4")
Max. machining diameter Ø 245 mm (9.6") Ø 490 mm (19.3") Ø 440 mm (17.3")
Max. machining length Ø 260 mm (10.2") Ø 500 mm (19.7") Ø 310 mm (12.2") Ø 290 mm (11.4")
Main Spindle(L)
Spindle nose A2-5 A2-6 A2-5 A2-6
Spindle bore Ø 56 mm (2.2") Ø 61 mm (2.4") Ø 56 mm (2.2") Ø 61 mm (2.4")
Bar capacity Ø 45 mm (1.8") Ø 51 mm (2") Ø 45 mm (1.8") Ø 51 mm (2")
Spindle bearing (ID) Ø 90 mm (3.5") Ø 100 mm (3.9") Ø 90 mm (3.5") Ø 100 mm (3.9")
Hydraulic chuck Ø 169 mm (6.7") Ø 210 mm (8.3") Ø 169 mm (6.7") Ø 210 mm (8.3")
Speed range 60-6000 rpm 42-4200 rpm 60-6000 rpm 42-4200 rpm
Sub Spindle (R)
Spindle nose A2-5
Spindle bore Ø 56 mm (2.2")
Bar capacity Ø 45 mm (1.8")
Spindle bearing (ID) Ø 90 mm (3.5")
Hydraulic chuck Ø 169 mm (6.7")
Speed range 60-6000 rpm
B stroke 260 mm (10.2") 500 mm (19.7") 520 mm (20.5") 500 mm (19.7")
B axis rapid travel 20 M/min.
Turret
Tool number 12 Stations (Servo turret) L: 12, R: 12 (Servo turret)
X axis stroke: X1 165 mm (6.5") 280 mm (11") L: 245 mm (9.6") L: 245 mm (9.6")
X axis stroke: X2 - R: 245 mm (9.6") R: 245 mm (9.6")
Z axis stroke: Z1 310 mm (12.2") 560 mm (22") L: 342 mm (13.5") L: 342 mm (13.5")
Z axis stroke: Z2 - R: 342 mm (13.5") R: 342 mm (13.5")
Rapid travel: X1, X2 30 M/min (1181 ipm) 20 M/min (787 ipm)
Rapid travel: Z1, Z2 30 M/min (1181 ipm) 20 M/min (787 ipm)
Tool change time 0.2 sec. L & R: 0.2 sec
Tool holder VDI 30, □ 20 mm L & R: VDI 30, □ 20 mm
Max. boring bar Ø 32 mm (1.3") L & R: Ø 32 mm (1.3")

*The Specifications are subject to change without prior notice.

 
Description TNC-N200 TNC-N250 TNC-N300
Capacity
Swing over bed Ø 480 mm (18.9") Ø 600 mm (23.6") Ø 630 mm (24.8")
Max. machining diameter Ø 280 mm (11") Ø 330 mm (13") Ø 442 mm (17.4")
Max. machining length Ø 462 / 700 / 1000 mm
(18.2" / 27.6" / 39.4")
Ø 430 / 740 / 1000 mm
(16.9" / 29.1" / 39.4")
Ø 700 / 1000 mm
(27.6" / 39.4")
Spindle
Spindle nose A2-6 A2-8
Spindle bore Ø 61 mm (2.4") Ø 77 mm (3") Ø 90 mm (3.5")
Bar capacity Ø 51 mm (2") Ø 65 mm (2.6") Ø 77 mm (3")
Spindle speed 40-4000 rpm 40-3500 rpm 35-3500 rpm
OPT: 25-2500 rpm
Living tools speed 25-4000 rpm 25-4000 rpm 25-4000 rpm
Spindle taper 1:20
Hydraulic chuck Ø 210 mm (8.3") Ø 254 mm (10")
OPT: Ø 304 mm (12")
Turret
Tool station Hyd. 12-160 OPT: V12 Servo 12-240
O.D. tooling □ 20 x 20 mm
(OPT: □ 25 x 25 mm)
□ 25 x 25 mm
I.D. tooling Dia. 32 mm (1.3")
OPT: Dia. 40 mm (1.6")
Dia. 40 mm (1.6")
Z travel 475 / 700 / 1000
(18.7" / 27.6" / 39.4")
460 / 700 / 1000
(18.1" / 27.6" / 39.4")
700 / 1000
(27.6" / 39.4")
X travel 142 mm (5.6") 180 mm (7.1") 250 mm (9.8")
Rapid travel (X, Z-axis) 30 M/min (1181 rpm)
Cutting feed rate (Both-axis) 0.001-500 mm/rev
Dia. of ball screw (Z-axis) Ø 36 mm (1.41") P10
Dia. of ball screw (X-axis) Ø 32 mm (1.26") P10
Tailstock
Quill diameter Ø 75 mm (3") Ø 90 mm (3.5")
Quill stroke 80 mm (3.2") 100 mm (4")
Quill taper MT No.4 MT No.5
Tailstock stroke 395 / 650 / 1000 390 / 650 / 1000 650 / 1000

*The Specifications are subject to change without prior notice.

Floor Space

YNC-N200DS (TNC-N200DS-B / DST / DST-B)


Twin Spindle


Work Range

TNC-N200DS

TNC-N200DS-B

TNS-N200DST(TNC-N200DST-B)

 
Model A B C D E F
TNC-N200DST M-206A5 M-208A6 170 520 526 186
TNC-N200DST-B M-206A5 M-206A5 185 505 511 186

Spindle & Bearings

Spindle & Bearings

Power Turret With C-axis

Examples For Machining With Driving Tools

Tools Presetter

Driving Tool System


Spindle Output And Torque


Interference Drawing

Standard Accessories (TNC-N200DS/DS-B/DST/DST-B)

  • FANUC 0iT controller for DS series, 18iTB controller for DST series
  • FANUC two years guaranty (Europe area only)
  • Hydraulic hollow chuck and cylinder on main spindle, 6” chuck on sub-spindle
  • 12 stations turret with tool disk
  • Auto coolant (internal with open flow), hydraulic & lubrication system
  • Work light
  • Chip conveyor
  • Tool box with tools & manuals

Standard Accessories (TNC-N200/N250/N300)

  • FANUC 0iT controller
  • FANUC two years guaranty (Europe area only)
  • 8” Hydraulic hollow chuck and cylinder on TNC-N200 and TNC-200L
    10” Hydraulic hollow chuck and cylinder on TNC-N300
  • 12 station hydraulic turret with tool disk
  • Auto coolant (internal with open flow), hydraulic & lubrication system
  • Work light
  • Chip conveyor
  • Tool box with tools & manuals

Options (TNC-N200DS/DS-B/DST/DST-B)

  • Extra bar capacity, hydraulic chuck & motor
  • Collet chuck
  • Soft jaws
  • Chuck air cleaner
  • Driving tool turret with C axis / spindle indexing
  • Driving tool turret with Y axis [stroke ±40mm, X axis motor α22iB (4kw), Z axis motor α12i (3kw)]
  • VDI driving tool holder
  • Tool presetter (Auto / Semi-auto)
  • Auto door
  • Parts catcher for sub spindle
  • Bar feeder
  • Software for bar feeder (with relay)
  • Hydrodynamic auto bar feeder
  • Transformer (power supply except 220V)
  • CE mark

Options (TNC-N200/N250/N300)

  • Extra bar capacity, hydraulic chuck & motor
  • Collet chuck
  • Soft jaws
  • Chuck air cleaner
  • Driving tool turret with C axis / spindle indexing
  • Driving tool turret with Y axis [stroke ±40mm, X axis motor α22iB (4kw), Z axis motor α12i (3kw)]
  • VDI driving tool holder
  • Tool presetter (Auto / Semi-auto)
  • Auto door
  • Parts catcher
  • Bar feeder
  • Software for bar feeder (with relay)
  • Hydrodynamic auto bar feeder
  • Transformer (power supply except 220V)
  • CE mark

Twin-spindle process (TNC-N200DST)

Loading Unloading system (TNC-N200 series)