关闭选单

传统车床

TK960/1060/1200

Heavy duty model

  • Headstock
  • arriage And Apron
  • Dual Gear Box
  • HeadstockExtra heavy duty casting headstock with:
    -Two opposed high precision SKF taper roller bearings
    -Precision grounded and hardened gears
    -Auto lubrication system
  • Carriage and ApronProportional and massive size carriage and apron
    Easy operation
    Spring loaded longitudinal hand wheel handle
    Adjustable clutch for carriage
    Chrome-nickel satin finished dials
    Direct reading cross feed dial
    Left side thread chasing dial
    Two feed shaft and lead screw supports for machine above 3 meters.
  • Dual Gear BoxQuick change dual gear box provides both Inch and Metric threads
    Fully automatic lubricated and total enclosed gear box
  • Bed and PedestalExtra heavily ribbed, massive designed, single piece casting bed
    Stable 400 / 460mm (Opt.) width bed
    Induction hardened and precision ground bed and cross slide ways

  • Copy device with 120mm stroke length
  • Semi-automatic rapid threading attachment
  • Heavy duty cast iron tailstock body MT6 taper quill movement by 2 speed reduction box and handwheel
  • Heavy duty taper attachment

 
Description TK960 TK1060 TK1200
Capacity
Swing over bed 960 mm (37.7") 1060 mm (41.7") 1170 mm (46")
Swing over cross slide 650 mm (25.5") 750 mm (29.5") 860 mm (33.8")
Swing over gap 1510 mm (59.4") 1610 mm (63.3") 1720 mm (67.7")
Center height 480 mm (18.8") 530 mm (20.8") 585 mm (23")
Width of gap 570 mm (22.4")
Between width / Auxiliary guide 560 mm (22”) / 660 mm (25.9")
Between centers 2M, 3M, 4M, 5M, 6M, 7M, 8M, 9M
Headstock
Spindle bore, Dia. Dia. 156 mm (6") / Opt. 230 mm (9") Dia. 156 mm (6") / Opt. 230 mm (9"), 310 mm (12"), 360 mm (14")
Spindle nose A2-11 / Opt. A2-15 A2-11 / Opt. A2-15, A2-20
Spindle speed (rpm), 12 steps 9-600 / Opt. 6-400 9-600 / Opt. 6-400, 5-300
Main spindle motor 25HP / Opt. 30HP
Feed and Threads
Cross travel 540 mm (21.2")
Cross feeds 0.065-0.96 mm / rev (48 kinds)
Longitudinal feeds 0.13-1.92 mm / rev (48 kinds)
Lead screw diameter Dia. 50 mm (1.9") x 2 TPI
Threading range, metric 20-30 mm / pitch (44 kinds)
Threading range, inch 1-15 TPI (48 kinds)
Module pitch threads 1-15M (32 kinds)
DP. pitch threads 2-30P (48 kinds)
Compound rest travel 300 mm (11.8")
Tool size 40 x 40 mm (1.5 x 1.5")
Rapid motor 1/2 HP
Tailstock
Quill Diameter Dia. 140 mm (5.5") / Dia. 200 mm (7.87")
Center taper MT6
Quill travel 300 mm (11.8")
Miscellaneous
Coolant pump 1/4 HP
Net weight, kgs 8000 (2M), 8550 (3M), 9100 (4M), 9900 (5M), 10700 (6M), 11600 (7M), 12500 (8M), 13400 (9M)

*The Specifications are subject to change without prior notice.

Standard Accessories

  • Inch / metric dual gear box
  • 4-way toolpost with T slot
  • Work light
  • Coolant system
  • Thread chasing dial
  • Cross and Longitudinal rapid travel
  • Longitudinal bar with travel dogs (for carriage stop)
  • Magnetic brake for main spindle only
  • Tool box with tools
  • Manual

Options

  • Upgrade spindle bore
  • Upgrade spindle motor
  • Chuck or face plate
  • Adaptor for rear chuck
  • Front chuck protection cover
  • Rear chuck protection cover
  • 4-position carriage stop
  • Steady rest
  • Follow rest
  • Rear tool post
  • Quick change tool post
  • Boring bar tool holder
  • Rapid threading attachment
  • Auto feed on top slide
  • Taper attachment
    (±10 degree, stroke 500 mm)
  • Rotating center, MT7
  • Full length rear splash guard(BC. 2M~5M)
  • Moveable rear splash guard
  • CE mark