Conventional Lathes - TK600 / 670 / 770 / 840

Products

Home > Products

Conventional Lathes Machine

We are one of leading Conventional Lathes Manufacturer in Taiwan since 1973. And insisting on deliever better quality Conventional Lathes to customers. Take a look at our Conventional Lathes technology below.

 
Description \ Model TK600 TK670
Capacity Swing over bed 600 mm (23.6") 670 mm (26.3")
Swing over cross slide 390 mm (15.3") 460 mm (18.1")
Swing over gap 820 mm (32.2") 890 mm (35")
Center height 300 mm (11.8") 335 mm (13.2")
Gap width from spindle nose 450 mm (17.7")
Between centers 2000 mm (78") , 3000 mm (118") , 4000 mm (157") , 5000 mm (196")
Bed width 400 mm (15.7") 400 mm (15.7") / 460 mm (18.1")
Weight Cap. Between centers 2800 kgs
Headstock Spindle bore, Dia. 80 mm (3.1")
[Opt. Ø104 mm (4") ]
104 mm (4")
[ Opt.156 mm (6")
A2-11, 230 mm (9") A2-15 ]
Spindle nose (Camlock) D1-8 (Opt. D1-11 o rA-11) D1-11 or A-11
Spindle speeds (rpm), steps 17-1200, 12
[Opt. 15-1000, 12]
15-1000,12
[Opt. 6" bore:13-800, 12 / 9"
bore: 9-600, 12]
Spindle motor 10 HP (Opt.15HP) 15 HP (Opt. 20HP)
Feed & Threads Cross slide travel 400mm bed 300 mm 300 mm
460mm bed - 385 mm
Cross feeds 0.025-0.35 mm / rev (36 kinds)
Longitudinal feeds 0.05-0.7 mm / rev (36 kinds)
Lead screw diameter Dia. 45 mm
Lead screw pitch 2 TPI (inch ) or 12 mm (metric)
Threading range, inch 2-28 TPI (36 kinds)
Threading range, metric 0.8-14 mm (65 kinds)
Module pitch threads 0.5-7 M (22 kinds)
DP. pitch threads 4-56 P (36 kinds)
Compound rest travel 230 mm (9")
Tool size 25 x 25 mm
Taper attachment stroke
(Opt.)
400 mm (15.7")
Tailstock Quill diameter 400mm bed 80 mm (3.1")
460mm bed 95 mm (3.7")
Center taper MT5
Quill travel 230 mm (9")
Miscellaneous
Coolant pump 1/8 HP
Net weight, kgs(1500mm) 3050 3150
Net weight, kgs(2000mm) 3250 3300
Net weight, kgs(3000mm) 3850 3900
Net weight, kgs(4000mm) 4400 4500
Net weight, kgs(5000mm) 5100 5200
Description \ Model TK770 TK840
Capacity Swing over bed 770 mm (30.3") 840 mm (33")
Swing over cross slide 560 mm (22") 630 mm (24.8")
Swing over gap 990 mm (38.9") 1060 mm (41.7")
Center height 385 mm (15.2") 420 mm (16.5")
Gap width from spindle nose 450 mm (17.7")
Between centers 2000 mm (78") , 3000 mm (118") , 4000 mm (157") , 5000 mm (196")
Bed width 400 mm (15.7") / 460 mm (18.1")  460 mm (18.1")
Weight Cap. Between centers 2800 kgs
Headstock Spindle bore, Dia. 104 mm (4")
[Opt.156 mm (6") A2-11, 230 mm (9") A2-15]
Spindle nose (Camlock) D1-11 or A-11
Spindle speeds (rpm), steps 15-1000,12
[Opt. 6" bore:13-800, 12 / 9" bore: 9-600, 12]
Spindle motor 15 HP (Opt.20 HP)
Feed & Threads Cross slide travel 400mm bed 385 mm -
460mm bed 435 mm 435 mm
Cross feeds 0.025-0.35 mm / rev (36 kinds)
Longitudinal feeds 0.05-0.7 mm / rev (36 kinds)
Lead screw diameter Dia. 45 mm
Lead screw pitch 2 TPI (inch ) or 12 mm (metric)
Threading range, inch 2-28 TPI (36 kinds)
Threading range, metric 0.8-14 mm (65 kinds)
Module pitch threads 0.5-7 M (22 kinds)
DP. pitch threads 4-56 P (36 kinds)
Compound rest travel 230 mm (9")
Tool size 25 x 25 mm
Taper attachment stroke
(Opt.)
400 mm (15.7")
Tailstock Quill diameter 400mm bed 80 mm (3.1")
460mm bed 95 mm (3.7")
Center taper MT5
Quill travel 230 mm (9")
Miscellaneous
Coolant pump 1/8 HP
Net weight, kgs(1500mm) 3300 3400
Net weight, kgs(2000mm) 3450 3600
Net weight, kgs(3000mm) 4050 4200
Net weight, kgs(4000mm) 4650 4850
Net weight, kgs(5000mm) 5350 5500

*The specifications are subject to change without prior notice.

  • Inch / metric dual gear box
  • 4-way toolpost with T slot
  • Work light
  • Coolant system
  • Thread chasing dial
  • Cross and Longitudinal rapid travel for 460 mm bed width
  • Longitudinal rapid travel for 400 mm bed width
  • Longitudinal bar with travel dogs for carriage stop
  • Magnetic brake for main spindle only for 460 mm bed width
  • Sleeve and centers

  • Upgrade spindle bore
  • Upgrade spindle motor
  • Chuck or face plate
  • Adaptor for rear chuck
  • Front chuck protection cover
  • Rear chuck protection cover
  • 4-position carriage stop
  • Steady rest
  • Follow rest
  • Rear tool post
  • Quick change tool post
  • Boring bar tool holder
  • Rapid threading attachment
    (TK770 / 840 only)
  • Copy attachment
    (stroke 120 mm)
  • Taper attachment
    (10 degree, stroke 400 mm)
  • Rotating center, MT5
  • Full length rear splash guard
  • Moveable rear splash guard
  • Cross rapid travel for 400 mmbed width
  • Magnetic brake for main spindlefor 400 mm bed width
  • CE mark

CNC-TAKANG CO., LTD.
  • No.72, Alley 7, Lane 98, 1st Road, Taichung Industry Park, Taichung 40767, TAIWAN