Slant bed CNC Lathe
TNC-10/10A/15
- The 45° bed is one piece, close grained casting mounted on a cast-iron base, on a cast-iron base. Widely spaced hardened and ground slideways combined with the 32mm dia. Z axis ball screw give exceptional rigidity. The slideways are coated with Teflon to eliminate stick-slip, minimize wear and maintain long term accuracy.
| Description | TNC-10 | TNC-10A | TNC-15 |
| Capacity | |||
| Swing over bed / Sub plate | Ø 400/120 mm (15.7"/4.7") | Ø 400/120 mm (15.7"/4.7") | Ø 410/120 mm (15.7"/4.7") |
| Sub plate length | 630 mm (24.8") | 630 mm (24.8") | 630 mm (24.8") |
| Chuck size | Ø 160 mm (6") | Ø 210 mm (8") | Ø 254 mm (10") |
| Spindle | |||
| Spindle nose | A2-5 | A2-6 | A2-8 |
| Spindle bearing diameter | Ø 90 mm (3.5") | Ø 100 mm (3.9") | Ø 130 mm (5.1") |
| Spindle bore | Ø 56 mm (2.2") | Ø 62 mm (2.4") | Ø 87 mm (3.4") |
| Bar capacity | Ø 45 (1.7") | Ø 52 (2") | Ø 75 (2.9") |
| Spindle taper | MT 6 | 1:20 | 1:20 |
| Spindle speed range | 40-4000 rpm | 40-4000 rpm | 40-3200 rpm |
| Slides | |||
| Longitudinal carriage travel (Z) | 340 mm (13.3") | 340 mm (13.3") | 340 mm (13.3") |
| Cross slide travel (x) | 450 mm (17.7") | 450 mm (17.7") | 450 mm (17.7") |
| X axis rapid traverse | 15 M/min | 15 M/min | 15 M/min |
| Z axis rapid traverse | 15 M/min | 15 M/min | 15 M/min |
| Tool holder | |||
| ID Tool holder dia. | Ø 40 (1.6") | Ø 40 (1.6") | Ø 40 (1.6") |
| OD Tool holder dia. | 20 x 20 mm | 25 x 25 mm | 25 x 25 mm |
| Bed | |||
| Width | 560 mm (22") | 560 mm (22") | 560 mm (22") |
| Slant angle | 45° | 45° | 45° |
*The Specifications are subject to change without prior notice.
Additional Sub-Plate for Cutting Tools Preset
The gang-tooling concept is an exceptionally rapid method of presenting a variety of different tools to the work-piece without the delays of turret retraction and indexing, thus eliminationg unproductive, NON-machining time.
Removable sub-plates are utilized that accommodate a wide range of turning tools as well as a milling head.
Easily preset for individual jobs, fast, accurate and efficient turning, milling, and off-center drilling and tapping can easily be accomplished in one chucking.
The entire tooled sub-plate can be removed simply, then stored until the job is repeated or if preferred, the tools may be easily re-arranged on the sup-plate and set-up for a different job.
Headstock
The headstock design allows efficient heat dissipation for maximum thermal stability.
Rigid High Speed Spindle
The main spindle is supported by five precision angular contact bearings combining high accuracy with rigidity for heavy metal removal.
Operator Convenience by Fanuc
The built-in control console is always accessible to the operator and contains all manual, semi-automatic, and CNC function controls.
Tooling system
Work Range
Floor Space
Output Torque
Standard Accessories
- Hydraulic hollow chuck and cylinder
- Tool holder type A.B.C. (one of each)
- Center sleeve, Dia. 12, 16, 20, 25, 32, MT2 & MT3(one of each)
- Sub-plate
- Coolant system
- Automatic lubrication system
- Work light
- Chip conveyor
Options
- Spindle Orientation Indexing(15°)
- Chuck air cleaner
- Bar feeder
- Parts catcher
- Bar puller
- Auto door
- Additional type A, B & C tool holders & sleeves
- Additional Sub-plate
- Milling attachment
- V8 turret
- Collet chuck & collets
